Sound Kit

The Sound Kit is:
Sennheiser ME66 shotgun directional microphone
Sennheiser K6 powering capsule
shock mount
XLR cable

needs 1 AA battery

Sennheiser ME66 directional microphone
The ME 66 is a shot gun microphone capsule designed for use with the K6 and K6P powering modules. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live environments. Matte black, anodized, scratch-resistant finish.

Features
Super-cardioid/lobar pick-up pattern
Highly directional
Low inherent self-noise
High sensitivity
Wide frequency response

Sennheiser K6 powering capsule
The K6 powering module is the heart of the Sennheiser professional modular microphone system and can be powered either by its internal 'AA' size 1.5 V battery or by 12 - 48 V phantom power. The K6 can be combined with different condenser microphone heads to provide a wide variety of polar patterns. Matte black, anodized scratch-resistant finish.

Features
Switchable bass roll-off filter (see photo below) protects against rumble, handling, pop and wind noise
On/off switch with battery test position
High output low noise
Transformerless balanced output on 3-pin XLR connector

More info on the ME66 microphone
More info on the K6 powering capsule

New Hotness - Nagra LB

The Nagra LB is a two-channel digital audio recorder with options for in-unit audio editing, recording to CF card or 2gb internal memory, and downloading files through Bluetooth, Ethernet, USB, or by moving the CF card to a card reader.

Needs 8 AA batteries and CF card.

Recording
Internal storage- 2 GB NAND Flash memory
Removable media- Compact Flash type II / III (Hot Swappable)
Disk format- FAT 16 / 32
Recording Method- Linear digital PCM, MPEG 1 layer 2 or MP-3
File type- 16 / 24 bit Broadcast Wave File BWF (WAV)
A/D & D/A conversion- 24 Bit Sigma Delta
Bit rates- 32 kbits/s up to 384 kbits/sec
Tracks- 2 individual
Sampling Rate- 44.1, 48 kHz, 88.2, 96 and 192kHz
Recording capacity- 1hr 24 bit 48 kHz per GB of disk / memory
Pre-recording buffer- Programmable (Maximum 3 seconds)
Display- 2 x Colour LCD
Level meters- On colour display AND by LED

Inputs
Digital input- XLR 3-pole
Analogue inputs- 2 x XLR Microphone (Dynamic, +48V Phantom) / line
Mic input sensitivity- 2 and 15 mV/Pa selectable
Limiters- On microphone inputs
Line input sensitivity- Adjustable from -6 dBm up to +24 dBm for 0 dBFS recording
THD at 1 kHz <0.1% Mic, <0.01% line (measured on AES out) Frequency response- Mic, 10Hz - 48 kHz ± 0.5 dB, Line ±0.2 dB (measured on AES out) Signal-to-noise ratio- >100 dB
Input level adj range- 50 dB Mic and from -6 to +24 dB Line
Input filters- LFA (with vortex filtering)
Internal microphone- Electret on the front panel

Outputs
Analogue line output- XLR 4.4V max (+15 dBm)
Digital output- XLR AES-3 (24 bit or 16 bit)
Headphones- Stereo 6.3mm (¼”) Jack 50 Ω
Internal speaker- 0.2W

Read more info here.
User Manual (May take a moment to load. Right-click to download.)