New Hotness - Nagra LB

The Nagra LB is a two-channel digital audio recorder with options for in-unit audio editing, recording to CF card or 2gb internal memory, and downloading files through Bluetooth, Ethernet, USB, or by moving the CF card to a card reader.

Needs 8 AA batteries and CF card.





Recording
Internal storage- 2 GB NAND Flash memory
Removable media- Compact Flash type II / III (Hot Swappable)
Disk format- FAT 16 / 32
Recording Method- Linear digital PCM, MPEG 1 layer 2 or MP-3
File type- 16 / 24 bit Broadcast Wave File BWF (WAV)
A/D & D/A conversion- 24 Bit Sigma Delta
Bit rates- 32 kbits/s up to 384 kbits/sec
Tracks- 2 individual
Sampling Rate- 44.1, 48 kHz, 88.2, 96 and 192kHz
Recording capacity- 1hr 24 bit 48 kHz per GB of disk / memory
Pre-recording buffer- Programmable (Maximum 3 seconds)
Display- 2 x Colour LCD
Level meters- On colour display AND by LED

Inputs
Digital input- XLR 3-pole
Analogue inputs- 2 x XLR Microphone (Dynamic, +48V Phantom) / line
Mic input sensitivity- 2 and 15 mV/Pa selectable
Limiters- On microphone inputs
Line input sensitivity- Adjustable from -6 dBm up to +24 dBm for 0 dBFS recording
THD at 1 kHz <0.1% Mic, <0.01% line (measured on AES out) Frequency response- Mic, 10Hz - 48 kHz ± 0.5 dB, Line ±0.2 dB (measured on AES out) Signal-to-noise ratio- >100 dB
Input level adj range- 50 dB Mic and from -6 to +24 dB Line
Input filters- LFA (with vortex filtering)
Internal microphone- Electret on the front panel

Outputs
Analogue line output- XLR 4.4V max (+15 dBm)
Digital output- XLR AES-3 (24 bit or 16 bit)
Headphones- Stereo 6.3mm (¼”) Jack 50 Ω
Internal speaker- 0.2W

Read more info here.
User Manual (May take a moment to load. Right-click to download.)

No comments:

Post a Comment